Lerata le tlase libolo tsa tšepe tse nepahetseng haholo
Libolo tsa tšepe tse nang le lerata le phahameng haholo ke libolo tsa tšepe tsa boemo bo holimo tse nang le sebopeho se chitja haholo le bokaholimo bo boreleli, hangata li sebelisoa ka har'a li-bearings tsa bolo tse nepahetseng joalo ka: "deep groove ball bearing", "Angular contact ball", "ball thrust bear", "point 4" , Ho ikamahanya le bolo ea maoto.
Libolo tsa tšepe tse nang le lerata le phahameng li lokela ho ba le thepa ea mantlha e kang spam ea bophelo bo bolelele, ho sisinyeha ho tlase, lerata le tlase, torque e tlase e potolohang le ts'epahalo e phahameng.Ho finyella ts'ebetso e ka holimo, hoa hlokahala ho netefatsa boleng ba likarolo tsohle tse jereng, ka holim'a tsohle, libolo tsa tšepe.
Re fana ka mefuta e fapaneng ea boholo, G5/G10 Z4 ea boemo bo phahameng ba chrome & libolo tsa tšepe tse sa hloekang bakeng sa tšebeliso ea bolo, e hlahisoang ke:
● ho thothomela tlaase & roughness;
● ho pota-pota hantle;
● Ho thatafala ho utloahalang;
● Matla a phahameng a mojaro;
● Mefokolo e fokolang ea bokaholimo
Tlhaloso
| Lerata le tlase libolo tsa tšepe tse nepahetseng haholo | |
| Kereiti | G5/G10 |
| Lintho tse bonahalang | 100Cr6, 440C |
| Ho thatafala | HRC 55-66 |
| Setifikeiti | ISO 9001, IATF 16949 e tšoaneleha |
Diameter
| KHOLO PHATI | |||
| (mm) | (inch) | (mm) | (inch) |
| 3.175 | 1/8" | 8.7 | - |
| 3.5 | - | 8.731 | 11/32" |
| 3.969 | 5/32" | 9.0 | - |
| 4.0 | - | 9.525 | 3/8" |
| 4.2 | - | 10.0 | - |
| 4.4 | - | 10.3188 | 13/32" |
| 4.5 | - | 11.0 | - |
| 4.63 | - | 11.1125 | 7/16" |
| 4.7 | - | 11.5094 | 29/64" |
| 4.7625 | 3/16" | 11.9062 | 15/32" |
| 4.8 | - | 12.0 | - |
| 4.9 | - | 12.3031 | 31/64" |
| 5.0 | - | 12.7 | 1/2" |
| 5.1 | - | 13.0 | - |
| 5.1594 | - | 13.4938 | 17/32" |
| 5.2 | - | 14.0 | - |
| 5.25 | - | 14.2875 | 9/16" |
| 5.3 | - | 15.0812 | 19/32" |
| 5.35 | - | 15.0 | - |
| 5.4 | - | 15.875 | 5/8" |
| 5.5 | - | 16.0 | - |
| 5.5562 | 7/32" | 16.6688 | 21/32" |
| 5.6 | - | 17.4625 | 11/16" |
| 5.9531 | 15/64" | 19.05 | 3/4" |
| 6.0 | - | 20.0 | - |
| 6.35 | 1/4" | 20.637 | 13/16" |
| 6.5 | - | 22.0 | - |
| 6.7469 | 17/64" | 22.225 | 7/8" |
| 7.0 | - | 23.8125 | 15/16 |
| 7.1438 | 7/32" | 25.4 | 1" |
| 7.5 | - | 30.1625 | 1 3/16" |
| 7.62 | - | 32.0 | - |
| 7.9375 | 5/16" | 38.1 | 1 1/2" |
| 8.0 | - | ||
Tlhokomeliso: Li-diameter tse tafoleng e ka holimo ke boholo boo re atisang ho bo etsa.ka kopo ikopanye le rona bakeng sa boholo bo sa ngolisoang.
Molemo oa Rōna
● Re 'nile ra kopanela tlhahiso ea bolo ea tšepe ka lilemo tse fetang 26;
● Re fana ka mefuta e mengata ea boholo bo fapaneng ho tloha ho 2.0mm ho ea ho 55.0mm.Letlapa la boholo le ka boleloa ka tsela e latelang;
● Re na le litoko tse ngata tse fumanehang.Boholo ba boholo bo tloaelehileng (2.0mm ~ 55.0mm) le li-gauge (-8 ~ + 8) li fumaneha, tse ka tsamaisoang hang-hang;
● Li-saese le li-gauge tse sa tloaelehang li ka etsoa ka kopo e khethehileng (e kang 5.1mm, 5.15mm, 5.2mm, 5.3mm 5.4mm bakeng sa pina ea setulo; 14.0mm bakeng sa cam shaft le CV joint, joalo-joalo);
● Sehlopha se seng le se seng sa libolo se hlahlobjoa ke mechini e tsoetseng pele: tester roundness, roughness tester, metallographic analysis microscope, hardness tester (HRC le HV) ho netefatsa boleng.
LBH
P: Ke litekanyetso life tseo u li khomarelang bakeng sa tlhahiso?
A: Lihlahisoa tsa rona li latela litekanyetso tse latelang tsa indasteri bakeng sa libolo tsa tšepe:
● ISO 3290 (YA MACHABA)
● DIN 5401 (GER)
● AISI/ AFBMA (USA)
● JIS B1501 (JAP)
● GB/T308 (CHN)
P: U fumana mangolo a mofuta ofe?
A: Re na le ISO9001: Setifikeiti sa tsamaiso ea tsamaiso ea 2008 le IATF16949: Setifikeiti sa tsamaiso ea boleng ba indasteri ea likoloi ea 2016.
P: Tiisetso ea hau ea boleng e joang?
A: Libolo tsohle tse hlahisoang li 100% li hlophisoa ka bar ea ho hlopha 'me li hlahlojoa ke mochine oa photoelectric surface defect detector.Pele o paka lisampole libolo tse tsoang lotho li lokela ho romeloa tlhahlobo ea ho qetela ho hlahloba ho ba mahoashe, ho pota-pota, ho thatafala, ho fapana, ho sithabela le ho thothomela ho latela maemo.Haeba litlhoko tsohle li fihletsoe, tlaleho ea tlhahlobo e tla etsoa bakeng sa moreki.Laboratori ea rona e tsoetseng pele e na le mechini le lisebelisoa tse nepahetseng haholo: "Rockwell hardness tester", "Vickers hardness tester", mochini o silakanyang, 'metara o boima, mitha e pota-potileng, papiso ea bophara, microscope ea metallographic, sesebelisoa sa ho lekanya ho thothomela, joalo-joalo.
P: O fana ka mehlala ea mahala bakeng sa tlhahlobo?
A: E, re fana ka mehlala ea mahala ho hlahloba le ho hlahloba boleng.
P: Nako ea hau ea ho tsamaisa e nka nako e kae?
A: Ka kakaretso ho nka matsatsi a 3-5 haeba lihlahisoa li le teng.Ho seng joalo, nako e lekantsoeng ea ho etella pele e lokela ho baloa ho latela bongata, thepa le kereiti ea hau.
P: Ha re tloaelane le lipalangoang tsa machaba.A na u tla sebetsana le tsamaiso eohle?
K: Ehlile, re sebetsana le litaba tsa tsamaiso le barekisi ba rona ba machaba ba nang le boiphihlelo ba lilemo tse ngata.Bareki ba hloka feela ho re fa lintlha tsa mantlha
P: Mokhoa oa hau oa ho paka o joang?
A: 1. Mokhoa o tloaelehileng oa ho paka: Mabokose a 4 a ka hare (14.5cm * 9.5cm * 8cm) ka lebokose le leng le le leng (30cm * 20cm * 17cm) le mokotla o omileng oa polasetiki o nang le pampiri e khahlanong le mafome ea VCI kapa mokotla oa polasetiki o tlotsitsoeng ka oli, mabokose a 24 ka pallet ea lehong. (80cm * 60cm * 65cm).Lebokose le leng le le leng le boima ba hoo e ka bang 23kgs;
Mokhoa oa ho paka oa 2.Steel drum: 4 meropa ea tšepe (∅35cm * 55cm) e nang le mokotla o omileng oa polasetiki o nang le pampiri e khahlanong le mafome ea VCI kapa mokotla oa polasetiki o tlotsitsoeng, meropa e 4 ka pallet ea lehong (74cm * 74cm * 55cm);
3.Customized ambalaji ho ea ka tlhokahalo moreki.
-
Mohala
-
E-mail
-
Whatsapp
-
Skype
-
Holimo